Writeup Coming soon.
Tortuga Shows
Posted
Author Justin Maynard
Categories Art
Tag error: <txp:the_video from="y" w="613" id="y35TTJJEY6o" /> -> Textpattern Notice: the_video tag is not registered while parsing form default on page default
textpattern/lib/txplib_publish.php:563 trigger_error()
textpattern/lib/txplib_publish.php:409 processTags()
textpattern/publish/taghandlers.php:2908 parse()
textpattern/publish/taghandlers.php:2937 txp_sandbox()
body()
textpattern/vendors/Textpattern/Tag/Registry.php:140 call_user_func()
textpattern/lib/txplib_publish.php:559 Textpattern\Tag\Registry->process()
textpattern/lib/txplib_publish.php:409 processTags()
textpattern/lib/txplib_misc.php:3551 parse()
textpattern/lib/txplib_publish.php:1158 parse_form()
Posted
Writeup Coming soon.
Author Justin Maynard
Categories Art
Posted
This job was building a Quiz Buzzer system for a TV Show. The system has two inputs for the buzzer switches and two 240 volt outputs on relays for switching on indicator lights. The system also has an audio output with a sound triggered for each buzzer. Finally there is a wired remote control panel with LED's to indicate the state of the system and a button for reset. The system is set up so the once a team has buzzed in it locks out until reset from the control box.
It was built for an ABC3 show called Steampunks. ABC Link Review
The system is built around a Freetronics Eleven and a Sparkfun MP3 Trigger. All the inputs and outputs are done though 0.1" header connectors all built up on a Adafruit prototyping board.
I've only got a few in construction photos of this one.
I was working for Alien Proof Construction.
Steampunks TV show was produced by Beyond for ABC3
Author Justin Maynard
Categories Electronics, TV
Posted
Author Justin Maynard
Categories Electronics, Advertising
Posted
Writeup Coming soon.
Posted
This project was a couple of blinkey LED effects for an advertising campaign. I built a simple “Flux Capacitor” style effect and a LED effect for the inside of a sci-fi helmet. In a handful of hours with parts on hand (ok 1 trip to the local Jaycar).
LED Helmet from NativeResolution & Omatic Labs on Vimeo.
Zortech demonstrates the LED Helmet from NativeResolution & Omatic Labs on Vimeo.
Flux Capacitor from NativeResolution & Omatic Labs on Vimeo.
I was working for Alien Proof Construction.
Further up the chain was Will O_Rourke & The Glue Society.
Final client was Ice Break Ice Coffee and I assume there was an add agency in there as well.
There is more information on the project on the Will O_Rourke site here.
Author Justin Maynard
Categories Electronics, Advertising
← Older Newer →